Mica sheet is an important component of melange.

Quartz sand is quartz particles formed by crushing and processing quartz stone. Quartz stone is a non-metallic mineral, which is a hard, wear-resistant and chemically stable silicate mineral. The color of quartz sand is milky white, or colorless translucent, Mohs hardness 7.Common specifications are: 0.5-1mm, 1-2mm, 2-4mm, 4-8mm, 8-16mm, 16-32mm, 10-20 mesh, 20-40 mesh, 40-80 mesh, 100-120 mesh.

Mica is a kind of rock forming mineral with hexagonal lamellar crystal shape and is one of the main rock forming minerals. Mica crystal has a layered structure inside, so it is lamellar crystal, mainly hexagonal lamellar crystal. Characteristics are insulation, high temperature resistance, the most used in industry is sericite, widely used in paint, paint, electrical insulation and other industries.

In addition to having all the advantages of ordinary coverings, polished coverings have high ornamental value like handicrafts, and the material is thick and the use year is longer, which is a high-grade covering product with practical value and appreciation value.

Emery, SiC, also known as silicon carbide. Pure is a colorless crystal. Density 3.06~3.20. It's very hard, about 9.5 degrees Morse. Generally, it is a colorless powdery particle. After grinding, it can be used as grinding powder, polishing paper, and friction surfaces for grinding wheels and whetstones. It is made by heating sand and carbon in an electric furnace.

Glass marbles are a small and beautiful toy, which can not only bring people fun, but also have many practical uses.

Fluorite (Fluorite) is also called fluorite. A mineral commonly found in nature that is symbiotic with many other minerals and occurs in many parts of the world, [1] with five effective varieties. The main component is calcium fluoride (CaFz). Crystallized into octahedrons and cubes. The crystal is glassy, bright and changeable color, brittle quality, Mohs hardness of 4, melting point of 1360℃, with complete cleavage properties. Some samples can emit light when subjected to friction, heating, ultraviolet irradiation, etc.

Features: 1, uniform particles. 2. Gorgeous color. 3, acid and alkali resistance. 4. High temperature and water resistance. 5. Wear-resistant altar corrosion-resistant

Corn cob is made from high quality corncob crushing processing through strict screening, cream-colored or yellow-brown.organize uniform, suitable hardness, good toughness, strong water absorption, good wear resistance and other advantages in the use of the process is not easy broken.

Quartz stone is a non-metallic mineral, which is a hard, wear-resistant and chemically stable silicate mineral. The color of quartz sand is milky white, or colorless translucent, Mohs hardness 7.Quartz sand is an important industrial mineral raw material, non-chemical dangerous goods, widely used in glass, casting, ceramics and fireproof materials, smelting ferrosilicon, metallurgical flux, metallurgy, construction, chemical industry, plastics, rubber, abrasives, filter media and other industries.

The use of emery is very wide, for example, the glass industry, used to grind glass rough edges, the stone industry is used to grind marble, the metal industry is used for sandblasting, rust removal, grinding, etc., and we use emery made of wear-resistant floor, used in the field of industrial floor.

Mica is a kind of rock forming mineral with hexagonal lamellar crystal shape and is one of the main rock forming minerals. Mica crystal has a layered structure inside, so it is lamellar crystal, mainly hexagonal lamellar crystal. Characteristics are insulation, high temperature resistance, the most used in industry is sericite, widely used in paint, paint, electrical insulation and other industries.

A geological, mineralogical, and geochemical characterization of the Tamame de Sayago (Zamora, Spain) deposit was carried out with the aim of knowing the conditions that facilitated the genesis in the same deposit of kaolinite and smectites. The alteration processes affecting a Variscan granite were deduced throughout the study of a very wide group of representative samples by X-ray diffraction (XRD), scanning electron microscopy (SEM), chemical analyses of major, minor, and trace elements, as well as δ18O, δ34S stable isotope and K/Ar dating analyses. In addition, 2D and 2.5D graphs of the kaolinite and smectite isoconcentrations were obtained from core data. According to the color and texture, two different clayey rock types were identified and named as homogeneous alteration zones (ZAHO) and heterogeneous alteration zones (ZAHE). The ZAHO are regoliths in which the granite texture is preserved, and the feldspars are almost completely kaolinized. In the ZAHE, the original texture of the granitic rock is lost, and the main clay mineral is smectite. The mineralogical composition is similar, with kaolinite, smectite, mica, quartz, scarce feldspar, and occasionally natroalunite and APS (aluminum-phosphate-sulphate); however, the mineral concentration varies considerably because ZAHO are rich in kaolin areas whereas ZAHE are bentonitic areas. Both rock types contain numerous veins and nodules. The weathering of the Paleozoic granite alongside the absence of sedimentation during the Mesozoic led to the formation of kaolinite that is preserved in ZAHO materials. Nonetheless, during the Cretaceous–Tertiary transit, the conditions of tectonic stability varied. Late Variscan faults reactivated which allowed the percolation of Mg- and Ca-rich hydrothermal fluids through the already kaolinized granite, increasing the alteration of the primary silicates and leading to the formation of smectites in ZAHE materials. The amount of smectites is greater closer to the faults. The stable isotopes indicate the meteoric nature of the low-temperature hydrothermal fluids. The K/Ar data obtained from the natroalunite of veins indicate that those hydrothermal fluids circulated in different pulses from 66.4 ± 1.7 to 58.8 ± 1.5 Ma, as a minimum. Those ages are coincident with the first formation stages of the Duero Basin.

When searching for effective skincare ingredients, the ground may not be the first place that comes to mind. But, clays (which are essentially types of dirt) are well known for their amazing cleansing and purifying properties. Natural clays have been used on the skin for centuries, and continue to be a popular ingredient in products today.In general, clays are soft, fine-grained mineral substances. There are different types of clay which vary in composition depending on the origin. While the properties of each clay varies, they are most commonly used in skincare because of their absorption properties. When applied, clay pulls oil from the skin, leaving it balanced and clean.Depending on your skin type, one clay may be better suited for your skin than another. For example, kaolin clay is a fine-grained clay with mild absorption properties, which makes it better for dry to normal skin. On the other hand, French green clay and bentonite clay have stronger absorption properties, making them a good fit for oily skin.

Kaolin and bentonite (nanoclay NM-600) are nanostructured aluminosilicates that share a similar chemical composition, platelet-like morphology, and high binding capacity for biomolecules. To investigate if these material-based criteria allow for a common grouping, we prepared particle suspensions of kaolin and bentonite with a similar hydrodynamic diameter and administered them to NR8383 alveolar macrophages in vitro and also to a rat lung using quartz DQ12 as a reference material. Bentonite was far more bioactive in vitro, indicated by a lower threshold for the release of enzymes, tumor necrosis factor α, and H2O2. In addition, in the lung, the early effects of bentonite exceeded those of kaolin and even those of quartz, due to strongly increased numbers of inflammatory cells, and elevated concentrations of total protein and fibronectin within the bronchoalveolar lavage fluid. The pro-inflammatory effects of bentonite decreased over time, although assemblies of particle-laden alveolar macrophages (CD68 positive), numerous type-2 epithelial cells (immunopositive for pro-surfactant protein C), and hypertrophic lung epithelia persisted until day 21. At this point in time, kaolin-treated lungs were completely recovered, whereas quartz DQ12 had induced a progressive inflammation. We conclude that bentonite is far more bioactive than equally sized kaolin. This argues against a common grouping of aluminosilicates, previously suggested for different kaolin qualities.Keywords: nanotoxicology, aluminosilicate, alveolar macrophage, intratracheal instillation

Natural clays have been used to heal skin infections since the earliest recorded history. Recently our attention was drawn to a clinical use of French green clay (rich in Fe-smectite) for healing Buruli ulcer, a necrotizing fasciitis (‘flesh-eating’ infection) caused by Mycobacterium ulcerans. These clays and others like them are interesting as they may reveal an antibacterial mechanism that could provide an inexpensive treatment for this and other skin infections, especially in global areas with limited hospitals and medical resources.Microbiological testing of two French green clays, and other clays used traditionally for healing, identified three samples that were effective at killing a broad-spectrum of human pathogens. A clear distinction must be made between ‘healing clays’ and those we have identified as antibacterial clays. The highly adsorptive properties of many clays may contribute to healing a variety of ailments, although they are not antibacterial. The antibacterial process displayed by the three identified clays is unknown. Therefore, we have investigated the mineralogical and chemical compositions of the antibacterial clays for comparison with non-antibacterial clays in an attempt to elucidate differences that may lead to identification of the antibacterial mechanism(s).The two French green clays used to treat Buruli ulcer, while similar in mineralogy, crystal size, and major element chemistry, have opposite effects on the bacterial populations tested. One clay deposit promoted bacterial growth whereas another killed the bacteria. The reasons for the difference in antibacterial properties thus far show that the bactericidal mechanism is not physical (e.g., an attraction between clay and bacteria), but by a chemical transfer or reaction. The chemical variables are still under investigation.Cation exchange experiments showed that the antibacterial component of the clay can be removed, implicating exchangeable cations in the antibacterial process. Furthermore, aqueous leachates of the antibacterial clays effectively kill the bacteria. Progressively heating the clay leads first to dehydration (200°C), then dehydroxylation (550°C or more), and finally to destruction of the clay mineral structure by (~900°C). By identifying the elements lost after each heating step, and testing the bactericidal effect of the heated product, we eliminated many toxins from consideration (e.g., microbes, organic compounds, volatile elements) and identified several redox-sensitive refractory metals that are common among antibacterial clays. We conclude that the pH and oxidation state buffered by the clay mineral surfaces is key to controlling the solution chemistry and redox related reactions occurring at the bacterial cell wall.

Of the 28 known species of the mica group, only 6 are common rock-forming minerals. Muscovite, the common light-coloured mica, and biotite, which is typically black or nearly so, are the most abundant. Phlogopite, typically brown, and paragonite, which is macroscopically indistinguishable from muscovite, also are fairly common. Lepidolite, generally pinkish to lilac in colour, occurs in lithium-bearing pegmatites. Glauconite, a green species that does not have the same general macroscopic characteristics as the other micas, occurs sporadically in many marine sedimentary sequences. All of these micas except glauconite exhibit easily observable perfect cleavage into flexible sheets. Glauconite, which most often occurs as pelletlike grains, has no apparent cleavage.

Mica is a mineral name given to a group of minerals that are physically and chemically similar.  They are all silicate minerals, known as sheet silicates because they form in distinct layers.  Micas are fairly light and relatively soft, and the sheets and flakes of mica are flexible. Mica is heat-resistant and does not conduct electricity.  There are 37 different mica minerals. The most common include: purple lepidolite, black biotite, brown phlogopite and clear muscovite.

Micas (/ˈmaɪkəz/ MY-kəz) are a group of silicate minerals whose outstanding physical characteristic is that individual mica crystals can easily be split into extremely thin elastic plates. This characteristic is described as perfect basal cleavage. Mica is common in igneous and metamorphic rock and is occasionally found as small flakes in sedimentary rock.[6] It is particularly prominent in many granites, pegmatites, and schists,[7] and "books" (large individual crystals) of mica several feet across have been found in some pegmatites.[8]Micas are used in products such as drywalls, paints, fillers, especially in parts for automobiles, roofing and shingles, as well as in electronics. The mineral is used in cosmetics and food[9] to add "shimmer" or "frost."

Mica is an ingredient used widely in the cosmetics industry. We look at which companies are using illegally sourced mica in their makeup, and the links with child labour in many mica mines.   Mica is the name of a naturally occurring group of silicate minerals. It is derived from the Latin word micare which means to shine, to flash or to glitter. Mica is used throughout the cosmetics and personal care industry, and is common in makeup like eye shadow and lipstick and other products that glow or shine.It can be listed as ‘mica,’ ‘potassium aluminium silicate,’ or ‘CI 77019,’ on ingredient lists.Mica is also mined for industries including pharmaceuticals, electronics, construction, and is used in things like car paint.However, there are several problems with mica, including the health impact on workers mining it, and child labour.